The equipment’s width can be up to 50 cm/20” (maximum width depends on the machine model). The line width starts at 5 cm (2”) and can be built up with 5 cm (2") standard valves.
- The line thickness is usually between 3 - 5 mm (118 mils - 197 mils).
- The application speed depends on the type of application and goes up to 6 km/h (3.8 mph).
- Available in 30, 40, 45 and 50 cm (12”, 16”, 18”, 20”) widths as standard.
The equipment is supplied with two sets of shutters - one set for applying flat lines and profiled markings and one set of shutters for applying dots. This set-up makes it possible for the equipment to apply various line types and patterns as well as a combination of dots over line. By using two sets of shutters the base line has time to cure slightly before the dots are applied and consequently, the dots will settle on top of the line with sharp edges, securing the optimum retroreflection.