Borum Mini-truck offers the perfect truck-based solution, and is ideal in connection with major road marking work on highway or motorway where capacity and high speed is a priority.

The modular designed BM TR 1000 T is the smallest Borum truck solution for thermoplastic extrusion.

Line Types
  • LineType1
  • LineType8

Line types that can be applied with this equipment

Contact us about this product

ENGINE

  • Type : Diesel, type 7C15
  • RatedPower : 145 HP @ 3500 rpm. The gearbox has 6 speeds forward.
  • Cylinder : 4 cylinders 3.0 liter with intercooler

COMPRESSOR

  • Compressor Capacity : Motor driven screw compressor. 3,5 m3/min at 10 bar. The diesel motor also drives the pumps for the hydraulic system. The unit has a diesel tank with 60 L capacity.

DRIVING PROPERTIES

  • Chassis : Fuso truck, chassis type Canter. 7,5T GVW
  • Operator section : The operator section is mounted on rails for easy shift from one side to the other. 2 head sets for communication between driver and operator.
  • Steel frame : The equipment is mounted on a steel frame of 4.6m x 2.2m. The frame has a solid rear frame on which indicator panel and warning light can be mounted. Rails with chains at ladders. Working platforms made in skid resistant material.
  • Telescopic Pointer : Telescopic pointer, hydraulically operated. Lifting and lowering of the pointer is controlled from the operator seat. The pointer is placed in the center of the truck and can manually be positioned in the right or left side.

COLOUR

  • Colour : RAL 1007 (Other colours available on request)
  • Colour : Standard: RAL 1007. Other colours available on request.

DIMENSIONS

  • Length : 6420 cm excluding pointer
  • Width : 2200 mm in transport position
  • : BM TR C 1000 fits into a standard shipping container
  • Weight : 7500 kg
  • Width : 2270 mm excl. rotating light

THERMOPLASTIC NON-PRESSURIZED TANK:

Non-pressurized thermoplastic tank, indirectly heated via heat transfer oil. The thermal oil and thermoplastic material temperature is thermostatically controlled and regulated automatically according to the settings

Burner system
Diesel burner system for heating of the thermal oil (and thermoplastic). Propane burner available on demand.

Vertical agitator (mixer)
With hydraulic transmission. Heated center pipe for efficient uniform temperature control. Perfect melting & homogenization of the thermoplastic. Stable construction with foundation and bearings at the top of the material tank.

EXTRUDER SET-UP

The working principle of the extruder lies in the extrusion of the hot thermoplastic material through the extruder shutters onto the road surface. This allows to switch between line types in seconds with a push of a button. No need for mechanical adjustment.

The thickness of the line is controlled by the slot gap and the speed of the machine, coupled to the thermoplastic feed rate.

Glass beads can be pre-mixed and/or automatically applied with glass bead guns.

You can choose between thermoplastic extruder of 30, 40, or 50 cm in total line width, built-up with 5 cm standard shutters (alternative shutter dimensions in the range of 4-10 cm for alternative line widths).

EXTRUDER SPECIFICATIONS

Effective heating of the complete unit using a centrifugal pump, 42 L/min, hydraulically driven. This ensures optimal performance and that the material does not stiffen and set inside the equipment.

The shutters have no contact with the high tensile steel drum and therefore, wear is minimized and lifetime is prolonged.

Pneumatic lifting cylinder for up/down function, operation controlled from operator’s seat.

Pneumatically controlled quick cleaning system for removal of solids left in the extrusion slot. It can be activated while extrusion is in process and is only slightly detectable on the line in the form of a moderate thickening of the layer.

The application speed varies according to the material, line type and width. Usual working speed is 3-6km/h but can go up to 8 km/h for some lines. Speed-dependent settings are possible.

AUGER SCREW PUMP WITH CONTINUOUS RECIRCULATION SYSTEM

The transport of material from tank to extruder head is done by a hydraulically driven auger screw pump, which is electronically controlled. The screw pump has a permanent thermoplastic recirculation system which ensures a constant flow past the inactive extrusion shutters, keeping these clean and ready for opening. This avoids settling and catching of solid parts and prevents unnecessary wear of mechanical parts.

Build-in pressure regulating system ensures that line width and thickness does not change no matter the number of shutters involved in the current marking assignment.

FEATURES - THERMOPLASTIC EXTRUDER:

Thermoplastic is a durable material that cures quickly and adheres strongly to the road surface. It can be used for applications of both flat lines (also known as type 1 lines) or of thick profiled lines and markings (also known as type 2 lines).

This type of material is used on various types of roads, but you will often see it on highways or motorways as it can withstand high traffic density, it has a high visibility at night and during wet conditions and glass beads can be mixed in for enhancing visibility.

LineMaster features

The Borum LineMaster control unit is an easy way of setting and controlling your line marking jobs. The LineMaster is attached to the operator's section of the machine and gives you full control of all your line marking tasks, from line application and pre-marking to reporting and invoicing.

It is possible to store up to 99 different line types, and to arrange these in up to 30 different marking programs. You are also able to pre-set line widths, line types, colours and combinations to have them ready for marking, and can instantly adjust them on the go.

Furthermore, you are able to view the status of various parts of the machine (e.g. compressor) on the computer screen that will help with correctly maintaining the machine and avoiding break downs.

Pre-marking system with paint can

Cruise control

Bar with pneumatic lift for mounting warning lights

(Comes without lights)

Sunshade with 1 rotating light

Remote control for BM LineMaster

Cone holder

BM Online

Pointer turning with steering

With hydraulic lifting system

Bead alarm mounted on bead gun

Air drier for bead tank

Pre-marking system with paint gun

Airknife

Ejector filling of bead tank

Fixed pointer

With hydraulic lifting system

Hydraulic broom

Quick shift

BORuM ON SOCIAL MEDIA

Follow us on these social platforms