Borum Mini-truck offers the perfect truck-based solution, and is ideal in connection with major road marking work on highway or motorway where capacity and high speed is a priority.
The modular designed BM TR 1000 C is the smallest Borum truck solution for application of cold paint.
Line types that can be applied with this equipment
Pressurized black steel tank for water based cold paint.
The material tank has a filling system with large filling holes. This makes the filling process very easy to manage. In addition, the large filling holes also make cleaning the tanks easy.
Agitator (mixer) driven by hydraulic motor and with manually operated reversing valve.
For all Borum spray machines, the equipment is mounted on a sliding retainer frame as standard that allows you to quickly slide the equipment from one side to another. You can have 1-3 paint guns and 1-3 bead guns are attached.
Ground distance is maintained by retainer wheel to ensure a constant road marking width.
Lifting of retainer is done from operators seat. Pneumatic cylinder, foundation and pneumatic solenoid valve.
Paint filter with cut-off valve for easy maintenance.
Can be equipped with multiple material tanks, so that multi-color marking can be carried out simultaneously.
Working speed can be up to 15 km/h depending on the conditions, e.g. material, line type and operator experience
High-performance spray gun. 6 mm nozzle set for water based, solvent based and high solid paints. The BM C 6 gun can work with paint marking pressure up to approx. 8 bar.
An air capacity of 300-700 L/min. is needed per gun.
Possibility to apply lines in widths from 8 to 20 cm with one gun depending on work conditions, application speed, and layer thickness. Line thickness is typically between 0.25 mm to 0.80 mm
Cold paint material is a cost effective solution for executing flat markings over all types of pavements and for use in repairments. The Borum cold paint application equipment can accommodate any type of line marking job as it can be set to execute lines in widths of 8-100 cm. Furthermore, depending on the choice of material tanks, it is possible to apply lines in different colours in the same time.
10L pressure solvent tank for cleaning of hoses and paint guns.
The Borum LineMaster control unit is an easy way of setting and controlling your line marking jobs. The LineMaster is attached to the operator's section of the machine and gives you full control of all your line marking tasks, from line application and pre-marking to reporting and invoicing.
It is possible to store up to 99 different line types, and to arrange these in up to 30 different marking programs. You are also able to pre-set line widths, line types, colours and combinations to have them ready for marking, and can instantly adjust them on the go.
Furthermore, you are able to view the status of various mechanical parts of the machine (e.g. compressor) on the computer screen that will help with correctly maintaining the machine and avoiding break downs.
The machine is equipped with two AT 250 airless spray-guns for lines from 5-30 cm mounted on adjustable block. The spray width is modified by adjusting the height of the gun or the nozzle.