Borum Mini-truck offers the perfect truck-based solution, and is ideal in connection with major road marking work on highway or motorway where capacity and high speed is a priority.

The modular designed BM TR 1000 C is the smallest Borum truck solution for application of 2 component.

Line Types
  • LineType1
  • LineType8

Line types that can be applied with this equipment

Contact us about this product

ENGINE

  • Type : Diesel, type 7C15
  • RatedPower : 145 HP @ 3500 rpm. The gearbox has 6 speeds forward.
  • Cylinder : 4 cylinders 3.0 liter with intercooler

COMPRESSOR

  • Compressor Capacity : Motor driven screw compressor. 3,5 m3/min at 10 bar. The diesel motor also drives the pumps for the hydraulic system. The unit has a diesel tank with 60 L capacity.

DRIVING PROPERTIES

  • Chassis : Fuso truck, chassis type Canter. 7,5T GVW
  • Operator section : The operator section is mounted on rails for easy shift from one side to the other. 2 head sets for communication between driver and operator.
  • Steel frame : The equipment is mounted on a steel frame of 4.6m x 2.2m. The frame has a solid rear frame on which indicator panel and warning light can be mounted. Rails with chains at ladders. Working platforms made in skid resistant material.
  • Telescopic Pointer : Telescopic pointer, hydraulically operated. Lifting and lowering of the pointer is controlled from the operator seat. The pointer is placed in the center of the truck and can manually be positioned in the right or left side.

COLOUR

  • Colour : RAL 1007 (Other colours available on request)
  • Colour : Standard: RAL 1007. Other colours available on request.

DIMENSIONS

  • Length : 6420 cm excluding pointer
  • Width : 2200 mm in transport position
  • : BM TR C 1000 fits into a standard shipping container
  • Weight : 7500 kg
  • Width : 2270 mm excl. rotating light

PRESSURIZED MATERIAL TANK FOR 2-COMPONENT

Pressurized material tank and filters in stainless steel for water and ammonium based paints.
Option for black steel tanks.

The material tank has a filling system with two filling holes. This makes the filling process very easy to manage.

Agitator (mixer)
Driven by hydraulic motor and with
manually operated reversing valve.

EQUIPMENT - GENERAL INTRODUCTION

Being equipped with an internal mixer for mixing of the paint and hardener and efficient cleaning system that is easily triggered from the machine's computer, the Borum 2-component cold plastic equipment is constructed to provide high-quality road markings.

THE BORUM 2-COMPONENT COLD PLASTIC EQUIPMENT (LOW PRESSURE SYSTEM) CONSISTS OF:

1. Separate material tanks for:
- Paint
- Hardener
- Solvent for cleaning

2. Feeder system with:
- Pump system that ensures the 98:2 ratio for the paint and hardener
- Mixer for blending the paint and the hardener. The mixing of the material is done internally, so it is not affected by external factors as wind etc., as for external mixing
- Pressure valves digitally controlled by Borum LineMaster computer. No need for mechanical adjustment while marking

Borum Vario Retainer

The Borum Vario Retainer provides a unique possibility to interchange between applications in a very short time, with very few standard tools. When the work is done, the retainer and application equipment can be easily stowed under the machine.

The retainer makes it possible to use all application equipment in different positions on the machine.

Easily slidable from side to side for an optimal working position. Ground distance is maintained by retainer wheel to ensure a constant road marking width.

LOW PRESSURE PUMP UNIT

The pump system consists of a lobe type paint pump and gear type pump for hardener. The two pumps are driven by one hydraulic motor via chain and variable gearbox securing the 98:2 relation between paint and hardener.

The system is also equipped with a controller for performing the flushing of gun(s) and mixer.

2-COMPONENT SPRAY EQUIPMENT

Low-pressure system using paint guns with atomizing air. Maximum paint pressure is up to 10 bar.

Possibility to apply line widths of up to 20 cm with one gun depending on work conditions, application speed, and layer thickness. The machine can be supplied with one or two spray guns.

For guns with atomizing air the volume of paint applied is adjusted by an electrically operated control valve. This gives a flexible driving speed while securing the same line thickness. Static mixer is provided.

Working speed can be up to 10 km/h depending on the conditions, e.g. material, line type and operator experience.

*NB! The equipment can simultaneously apply either two continuous lines or two interrupted lines. The equipment cannot apply continuous or interrupted lines simultaneously.

Limitations


*NB! There are limitations when using the same machine for both sprayed and profiled applications:
- Thorough cleaning of material tanks is needed when changing material
- The pump will be worn when using the rougher material for profiled markings, so after a while, the pressure will not be sufficient for a proper result with spray.

CLEANING SYSTEM

The cleaning system is formed by a solvent tank for cleaning of mixer-head, hoses and paint guns. The system is activated via the Borum LineMaster computer. The cleaning process is an automated preset sequence ensuring the correct valves are opening/closing.

36L (79 lb wt.) pressure solvent tank for cleaning of mixer-head, hoses and paint guns.

Stainless steel, max 8.5 bar (123 psi).

NB! When working with 2-component whenever the application is stopped, application equipment has to be cleaned from the cold plastic mixture within a few minutes.

LineMaster features

The Borum LineMaster control unit is an easy way of setting and controlling your line marking jobs. The LineMaster is attached to the operator's section of the machine and gives you full control of all your line marking tasks, from line application and pre-marking to reporting and invoicing.

It is possible to store up to 99 different line types, and to arrange these in up to 30 different marking programs. You are also able to pre-set line widths, line types, colours and combinations to have them ready for marking, and can instantly adjust them on the go.

Furthermore, you are able to view the status of various parts of the machine (e.g. compressor) on the computer screen that will help with correctly maintaining the machine and avoiding break downs.

Airless spray-guns

The machine is equipped with two AT 250 airless spray-guns for lines from 5-30 cm mounted on adjustable block. The spray width is modified by adjusting the height of the gun or the nozzle.

Pre-marking system with paint can

Cruise control

Bar with pneumatic lift for mounting warning lights

(Comes without lights)

Sunshade with 1 rotating light

Remote control for BM LineMaster

Cone holder

BM Online

Pointer turning with steering

With hydraulic lifting system

Bead alarm mounted on bead gun

Air drier for bead tank

Pre-marking system with paint gun

Airknife

Ejector filling of bead tank

Fixed pointer

With hydraulic lifting system

Hydraulic broom

Hand paint gun

BORuM ON SOCIAL MEDIA

Follow us on these social platforms