Borum Mini-truck offers the perfect truck-based solution, and is ideal in connection with major road marking work on highway or motorway where capacity and high speed is a priority.

The modular designed BM TR 1000 C is the smallest Borum truck solution for airless application of 2 component.

Line Types

Line types that can be applied with this equipment

Contact us about this product

ENGINE

  • Type : Diesel, type 7C15
  • RatedPower : 145 HP @ 3500 rpm. The gearbox has 6 speeds forward.
  • Cylinder : 4 cylinders 3.0 liter with intercooler

COMPRESSOR

  • Compressor Capacity : Motor driven screw compressor. 3,5 m3/min at 10 bar. The diesel motor also drives the pumps for the hydraulic system. The unit has a diesel tank with 60 L capacity.

DRIVING PROPERTIES

  • Chassis : Fuso truck, chassis type Canter. 7,5T GVW
  • Operator section : The operator section is mounted on rails for easy shift from one side to the other. 2 head sets for communication between driver and operator.
  • Steel frame : The equipment is mounted on a steel frame of 4.6m x 2.2m. The frame has a solid rear frame on which indicator panel and warning light can be mounted. Rails with chains at ladders. Working platforms made in skid resistant material.
  • Telescopic Pointer : Telescopic pointer, hydraulically operated. Lifting and lowering of the pointer is controlled from the operator seat. The pointer is placed in the center of the truck and can manually be positioned in the right or left side.

COLOUR

  • Colour : RAL 1007 (Other colours available on request)
  • Colour : Standard: RAL 1007. Other colours available on request.

DIMENSIONS

  • Length : 6420 cm excluding pointer
  • Width : 2200 mm in transport position
  • : BM TR C 1000 fits into a standard shipping container
  • Weight : 7500 kg
  • Width : 2270 mm excl. rotating light

MATERIAL TANK - STAINLESS, NON-PRESSURISED

The material tank has a filling system with large filling holes. This makes the filling process very easy to manage. In addition, the large filling holes also make cleaning the tanks easy.

AGITATOR (MIXER)

Agitator driven by hydraulic motor and with
manually operated reversing valve.

2-COMPONENT (98:2) AIRLESS EQUIPMENT

High pressure filter unit for airless
equipment. Pulsation damper in the hydraulic oil circuit, which helps minimize piston pulsations.

Sliding retainer frame, upon which 1 or 2 paint guns and 1 or 2 bead guns are attached. Easy slideable from side to side for an optimal working position. Ground distance is maintained by retainer wheel to ensure a constant road marking
width. The retainer makes it possible to use all application equipment in different positions on the machine.

Possibility to apply line widths of 25 cm with standard nozzle depending on the nozzle choice, line thickness, work conditions, application speed and layer thickness.

Working speed can be up to 15 km/h depending on the conditions, e.g. material, line type and operator experience.

The cleaning process is an automated preset sequence ensuring the correct valves are opening/ closing. The system is activated via the Borum LineMaster computer.

PISTON PUMP - DOUBLE ACTION

Double-action piston pump for 98% paint and 2% hardener with two pistons for the paint and one piston for the hardener. The 3 pistons are driven by a common hydraulic motor in order to secure the right relation between paint and hardener. A static mixer is mounted close to the paint guns.

Efficient pump with less wear and tear than other product available on the market. The pump has a sensor for registration of the paint flow. The pump capacity is up to 45 L/min (99 lb wt./ min).

Material advantages

The 2-component application material is a great solution for ensuring reliable line marking during dense traffic or in shifting weather conditions.

With 2-component material you get a wear resistant road marking with good visibility, durability and little dirt pick up.

CLEANING SYSTEM

The system is activated via the Borum LineMaster computer. Solvent tank for cleaning of mixer-head, hoses and paint guns. The cleaning process is an automated preset sequence ensuring the correct valves are opening/closing.

36L (79 lb wt.) pressure solvent tank for cleaning of mixer-head, hoses and paint guns.

Stainless steel, max 8.5 bar (123 psi).

LineMaster features

The Borum LineMaster allows you efficient control of all line marking tasks, from line application and pre-marking to reporting and invoicing. It is possible to store up to 99 different line types, and to arrange these in up to 30 different marking programs. You are also able to pre-set line widths, line types, colours and combinations to have them ready for marking, and can instantly adjust them on the go.

Pre-marking system with paint can

Cruise control

Bar with pneumatic lift for mounting warning lights

(Comes without lights)

Sunshade with 1 rotating light

Remote control for BM LineMaster

Cone holder

GPS system

Pointer turning with steering

With hydraulic lifting system

Bead alarm mounted on bead gun

Air drier for bead tank

Pre-marking system with paint gun

Airknife

Ejector filling of bead tank

Fixed pointer

With hydraulic lifting system

Hydraulic broom

Hand paint gun

BORuM ON SOCIAL MEDIA

Follow us on these social platforms