The Borum® Master 5000 series provides you with a variety of high capacity line marking machines designed for large scale jobs such as marking highways, motorways or airport runways.

The material tank capacity can be either 2 x 440L or 1 x 1000L. The possibility of the large material capacity naturally gives fewer stops during the day for refilling.

The BM 5000 has a two-seat slidable drive and operator section for flexible working on left or right side.

The application equipment can be set to execute lines in widths between 10-30 cm. The equipment on this machine may be used for the application of single and double flat lines of different widths.

Line Types
  • Two basic interrupted lines
  • Basic Line (Continuous)

Line types that can be applied with this equipment

Contact us about this product Download datasheet [uk]

ENGINE

  • Manufacturer : Kubota
  • Type : Turbo
  • Cooling : Water
  • Cylinder : 4 stroke 3800 cm3
  • RatedPower : 74 KW
  • Approval : EU Stage IIIA resp. TIER 3

COMPRESSOR

  • Compressor Capacity : Choice of 1-2 compressors can give 1800 - 3600 L/min @ 10 bar. Integrated oil-cooling system. Air-cooler incl. water separator

FILLING CAPACITIES

  • Fuel tank capacity : 180 L (2 x 90 L)
  • Hydraulic tank size : 93 L
  • Bead capacity : 330 L (2 x 165 L). Pressurized (max 3 bars)

MATERIAL TANK

  • Material Tank : 2 x 440 L or 1000 L

DRIVING PROPERTIES

  • Drive angle : 12.5 degrees / 22% (low gear 7200 kg)
  • Turning radius : 4.90 m.
  • Steering : Dual torque steering

TRANSMISSION

  • Hydrostatic transmission : For variable speed
  • Speed : Low gear 0-12 km/h, high gear 0-24 km/h

ELECTRICAL SYSTEM

  • Electrical system : 12 V / 150 Amp

CONTROL UNIT

  • Borum LineMaster : Program up to 99 different line types. Organise lines in up to 30 marking programs. 8" display. Transfer of daily marking reports. See more detailed info.

COLOUR

  • Colour : RAL 1007 (Other colours available on request)

DIMENSIONS

  • Length : 5350 mm
  • Width : 1300 mm
  • Height : 2250 mm

PRESSURIZED MATERIAL TANK FOR 2-COMPONENT

Pressurized material tank and filters in stainless steel for water and ammonium based paints.

The material tank has a filling system with two filling holes. This makes the filling process very easy to manage.

Agitator (mixer)
Driven by hydraulic motor and with
manually operated reversing valve.

Borum Vario Retainer

The Borum Vario Retainer provides a unique possibility to interchange between applications in a very short time, with very few standard tools. When the work is done, the retainer and application equipment can be easily stowed under the machine.

The retainer makes it possible to use all application equipment in different positions on the machine.

Easily slidable from side to side for an optimal working position. Ground distance is maintained by retainer wheel to ensure a constant road marking width.

PUMP UNIT

The pump system consists of a lobe type paint pump and gear type pump for hardener. The two pumps are driven by one hydraulic motor via chain and variable gearbox securing the 98:2 relation between paint and hardener.

The system is also equipped with a controller for performing the flushing of gun(s) and mixer.

2-COMPONENT SPRAY EQUIPMENT

For guns with atomizing air the volume of paint applied is adjusted by an electrically operated control valve. This gives a flexible driving speed while securing the same line thickness. Static mixer is provided.

Material advantages

The 2-component application material is a great solution for ensuring reliable line markings in areas with dense traffic. With 2-component material you get a wear resistant road marking with good visibility, durability and little dirt pick up.

CLEANING SYSTEM

The cleaning system is formed by a solvent tank for cleaning of mixer-head, hoses and paint guns. The system is activated via the Borum LineMaster computer. The cleaning process is an automated preset sequence ensuring the correct valves are opening/closing.

36L (79 lb wt.) pressure solvent tank for cleaning of mixer-head, hoses and paint guns.

Stainless steel, max 8.5 bar (123 psi).

NB! When working with 2-component whenever the application is stopped, application equipment has to be cleaned from the cold plastic mixture within a few minutes.

LineMaster features

The Borum LineMaster control unit is an easy way of setting and controlling your line marking jobs. The LineMaster is attached to the operator's section of the machine and gives you full control of all your line marking tasks, from line application and pre-marking to reporting and invoicing.

It is possible to store up to 99 different line types, and to arrange these in up to 30 different marking programs. You are also able to pre-set line widths, line types, colours and combinations to have them ready for marking, and can instantly adjust them on the go.

Furthermore, you are able to view the status of various mechanical parts of the machine (e.g. compressor) on the computer screen that will help with correctly maintaining the machine and avoiding break downs.

Hand paint gun

Pre-marking system with paint can

Cruise control

Bar with pneumatic lift for mounting warning lights

(Comes without lights)

Sunshade with 1 rotating light

Remote control for BM LineMaster

Cone holder

BM Online

Pointer turning with steering

With hydraulic lifting system

Bead alarm mounted on bead gun

Air drier for bead tank

Pre-marking system with paint gun

Airknife

Ejector filling of bead tank

Fixed pointer

With hydraulic lifting system

Hydraulic broom

BORuM ON SOCIAL MEDIA

Follow us on these social platforms