2 COMPONENT AIRLESS APPLICATION (98:2)
The Borum Master 5000 series provides you with a variety of high capacity line marking machines designed for large scale jobs such as marking highways, motorways or airport runways.
The material tank capacity can be either 2 x 440L or 1 x 1000L. The possibility of large material capacity naturally gives fewer stops during the day for refilling.
The BM 5000 has a two-seat slidable drive and operator section for flexible working on the left or right side.
The application equipment can be set to execute lines between 10 - 30 cm in one colour. The equipment on this machine may be used for the application of flat lines in both single and double lines of different widths as well as for simultaneous application of continuous and interrupted lines.
Line types that can be applied with this equipment
Non-pressurized material tank and filters in stainless steel for water and ammonium based paints.
The material tank has a filling system with large filling holes. This makes the filling process very easy to manage. In addition, the large filling holes also make cleaning the tanks easy.
Agitator (mixer) driven by hydraulic motor and with manually operated reversing valve.
High pressure filter unit for airless equipment. Pulsation damper in the hydraulic oil circuit, which helps minimize piston pulsations.
Sliding retainer frame, upon which 1 or 2 paint guns and 1 or 2 bead guns are attached. Easy slideable from side to side for an optimal working position. Ground distance is maintained by retainer wheel to ensure a constant road marking width. The retainer makes it possible to use all application equipment in different positions on the machine.
Possibility to apply line widths of 25 cm with standard nozzle depending on the nozzle choice, line thickness, work conditions, application speed and layer thickness.
Working speed can be up to 15 km/h depending on the conditions, e.g. material, line type and operator experience.
The cleaning process is an automated preset sequence ensuring the correct valves are opening/ closing. The system is activated via the Borum LineMaster computer.
Double-action piston pump for 98% paint and 2% hardener with two pistons for the paint and one piston for the hardener. The 3 pistons are driven by a common hydraulic motor in order to secure the right relation between paint and hardener. A static mixer is mounted close to the paint guns.
Efficient pump with less wear and tear than other product available on the market. The pump has a sensor for registration of the paint flow. The pump capacity is up to 45 L/min (99 lb wt./ min).
The cleaning system is formed by a solvent tank for cleaning of mixer-head, hoses and paint guns. The system is activated via the Borum LineMaster computer. The cleaning process is an automated preset sequence ensuring the correct valves are opening/closing.
36L (79 lb wt.) pressure solvent tank for cleaning of mixer-head, hoses and paint guns.
Stainless steel, max 8.5 bar (123 psi).
NB! When working with 2-component whenever the application is stopped, application equipment has to be cleaned from the cold plastic mixture within a few minutes.
The Borum LineMaster control unit is an easy way of setting and controlling your line marking jobs. The LineMaster is attached to the operator's section of the machine and gives you full control of all your line marking tasks, from line application and pre-marking to reporting and invoicing.
It is possible to store up to 99 different line types, and to arrange these in up to 30 different marking programs. You are also able to pre-set line widths, line types, colours and combinations to have them ready for marking, and can instantly adjust them on the go.
Furthermore, you are able to view the status of various parts of the machine (e.g. compressor) on the computer screen that will help with correctly maintaining the machine and avoiding break downs.