The Borum Master BM 5000 is our largest self-propelled line marking machine. Its high capacity and power make the BM 5000 the best and most uncompromising choice for any major line marking job.

The machine can be equipped with two material tanks of 440 L, which offer the possibility of marking in two colors or one material tank of 440 L or 1000 L for one color. 

The BM 5000 C can be equipped with up to 5 paint guns and 5 beads guns with which you can apply line widths of up to 100 cm. Borum machines are also equipped with a sliding retainer frame that makes handling the application equipment easier and quicker.

Equipped with the new generation of Borum’s LineMaster computer, you are able to easily switch between line types, and adjust line characteristics on the go in order to save time.

Line Types
  • Basic Line (Interupted)
  • Basic Line (Continuous)

Line types that can be applied with this equipment

Contact us about this product Download datasheet [uk]

ENGINE

  • Manufacturer : Kubota
  • Type : Turbo
  • Cooling : Water
  • Cylinder : 4 stroke 3800 cm3
  • RatedPower : 74 KW
  • Approval : EU Stage IIIA resp. TIER 3

COMPRESSOR

  • Compressor Capacity : Choice of 1-2 compressors can give 1800 - 3600 L/min @ 10 bar. Integrated oil-cooling system. Air-cooler incl. water separator

FILLING CAPACITIES

  • Fuel tank capacity : 180 L (2 x 90 L)
  • Hydraulic tank size : 93 L
  • Bead capacity : 330 L (2 x 165 L). Pressurized (max 3 bars)

MATERIAL TANK

  • Material Tank : 2 x 440 L or 1000 L

DRIVING PROPERTIES

  • Drive angle : 12.5 degrees / 22% (low gear 7200 kg)
  • Turning radius : 4.90 m.
  • Steering : Dual torque steering

TRANSMISSION

  • Hydrostatic transmission : For variable speed
  • Speed : Low gear 0-12 km/h, high gear 0-24 km/h

ELECTRICAL SYSTEM

  • Electrical system : 12 V / 150 Amp

CONTROL UNIT

  • Borum LineMaster : Program up to 99 different line types. Organise lines in up to 30 marking programs. 8" display. Transfer of daily marking reports. See more detailed info.

COLOUR

  • Colour : RAL 1007 (Other colours available on request)

DIMENSIONS

  • Length : 5350 mm
  • Width : 1300 mm
  • Height : 2250 mm

MATERIAL TANK FOR COLD PAINT, PRESSURIZED

Pressurized black steel tank for water based cold paint.

The material tank has a filling system with large filling holes. This makes the filling process very easy to manage. In addition, the large filling holes also make cleaning the tanks easy.

Agitator (mixer) driven by hydraulic motor and with manually operated reversing valve.

PRESSURIZED COLD PAINT EQUIPMENT

The Borum cold paint application equipment can be set to execute lines in widths of 8-100 cm and with multiple colours.

Retainer

Sliding retainer frame, upon which 1-5 paint guns and 1-5 bead guns are attached. Easily slidable from side to side for an optimal working position.

Ground distance is maintained by retainer wheel to ensure a constant road marking width.

Lifting of retainer is done from operators seat. Pneumatic cylinder, foundation and pneumatic solenoid valve.

Paint filter with cut-off valve for easy maintenance.

Can be equipped with multiple material tanks, so that multi-color marking can be carried out simultaneously.

Working speed can be up to 15 km/h depending on the conditions, e.g. material, line type and operator experience.

BM C6 COLD PAINT GUN

High-performance spray gun. 6 mm nozzle set for water based, solvent based and high solid paints. The BM C 6 gun can work with paint marking pressure up to approx. 8 bar.

An air capacity of 300-700 L/min. is needed per gun.

Possibility to apply lines in widths from 8 to 20 cm with one gun depending on work conditions, application speed, and layer thickness. Line thickness is typically between 0.25 mm to 0.80 mm

COLD PAINT FEATURES

Cold paint material is a cost effective solution for executing flat markings over all types of pavements and for use in repairments. The Borum cold paint application equipment can accommodate any type of line marking job as it can be set to execute lines in widths of 8-100 cm. Furthermore, depending on the choice of material tanks, it is possible to apply lines in different colours in the same time.

CLEANING SYSTEM

10L pressure solvent tank for cleaning of hoses and paint guns.

LineMaster features

The Borum LineMaster control unit is an easy way of setting and controlling your line marking jobs. The LineMaster is attached to the operator's section of the machine and gives you full control of all your line marking tasks, from line application and pre-marking to reporting and invoicing.

It is possible to store up to 99 different line types, and to arrange these in up to 30 different marking programs. You are also able to pre-set line widths, line types, colours and combinations to have them ready for marking, and can instantly adjust them on the go.

Furthermore, you are able to view the status of various mechanical parts of the machine (e.g. compressor) on the computer screen that will help with correctly maintaining the machine and avoiding break downs.

KNOWING THE BM 5000

DIMENSIONS

Pre-marking system with paint can

Cruise control

Bar with pneumatic lift for mounting warning lights

(Comes without lights)

Sunshade with 1 rotating light

Remote control for BM LineMaster

Cone holder

BM Online

Pointer turning with steering

With hydraulic lifting system

Bead alarm mounted on bead gun

Air drier for bead tank

Pre-marking system with paint gun

Airknife

Ejector filling of bead tank

Fixed pointer

With hydraulic lifting system

Hydraulic broom

Hand paint gun

BORuM ON SOCIAL MEDIA

Follow us on these social platforms