THERMOPLASTIC SPRAY (PUMP) AND RIBLINE APPLICATION
The Borum® Master 3000 series provides you with a variety of high capacity line marking machines designed for large scale jobs such as marking highways, motorways or airport runways.
The material tank capacity can be up to 450L. The possibility for the large material capacity naturally gives fewer stops during the day for refilling.
The BM 3000 has a two-seat slidable drive and operator section for flexible working on left or right side.
Depending on the equipment and set-up, the spray plastic equipment can apply lines of up to 60 cm width, while the rib line equipment comes with fixed line widths up to 20 cm.
Line types that can be applied with this equipment
Non-pressurized thermoplastic tank indirectly heated via heat transfer oil. The thermal oil and thermoplastic material temperature is thermostatically controlled and regulated automatically.
Diesel burner system for heating of the thermal oil (and thermoplastic). Propane burner available on demand.
Vertical agitator (mixer)
With hydraulic transmission. Heated center pipe for efficient uniform temperature control. Perfect melting & homogenization of the thermoplastic. Stable construction with foundation and bearings at the top of the material tank.
The RibLine equipment is mounted directly on the side of the material tank. Alternatively, if the machine is also equipped with a thermoplastic extruder, you can mount it on the side of the extruder.
The equipment is supplied by an automatic filling system with a pneumatic level center.
Spray-plastic pump operates with a non-pressurised material tank. The pump consists of a hydraulically driven motor, gearbox, clutch, highly durable rotors and pump house. Pump housing is oil-jacketed and isolated. Capacity up to 80 L/min. at 8.5 bar (176 lb wt./min. at 123 psi).
The hydraulic control valve adjusts the quantity of spray-plastic material according to the speed of the machine in order to obtain a constant layer thickness.
The application speed can go up to 15 km/h.
Automatic high-capacity spray plastic gun. Consists of an oil jacketed gun body and a pneumatic cylinder. Possibility to apply line widths ranging from 10 - 20 cm depending on line thickness, work conditions, application speed and layer thickness. As an alternative, we offer a narrow nozzle, which can spray 5-15 cm with one gun.
Optional narrow nozzle size of 3 mm or wide nozzle size of 7 mm.
Hydraulic transmission with motor, shaft, safety valve and on/off valve.
Sliding retainer frame, on which 1-3 spray guns and 1-3 bead guns are attached. Easily slideable from side to side for an optimal working position.
Ground distance is maintained by retainer wheels to ensure a constant road marking width. All material pipes are oil-jacketed and insulated to maintain an ideal material temperature.
Lifting of retainer from operators seat using a hydraulic cylinder.
Automatic high-capacity spray plastic gun. Consists of an oil jacketed gun body and a pneumatic cylinder.
The spray plastic application equipment that works with a pump gives you the possibility of quickly adjusting the pressure while driving. Our LineMaster may also to a certain extent do this automatically.
Furthermore, filling and thermoplastic filtration is easy, since the tank lid is larger than the one on the pressurized tank.
Sprayed thermoplastic forms a uniform application that is more durable and dries faster compared to cold paint applications.
The Borum LineMaster allows you efficient control of all line marking tasks, from line application and pre-marking to reporting and invoicing. It is possible to store up to 99 different line types, and to arrange these in up to 30 different marking programs. You are also able to pre-set line widths, line types, colours and combinations to have them ready for marking, and can instantly adjust them on the go.
Pneumatically controlled quick cleaning system for removal of solids left in the extrusion slot. Can be activated while extrusion is in process and is only slightly detectable on the line in the form of a moderate thickening of layer.