COLD PAINT AIRLESS APPLICATION EQUIPMENT
Airport marking creates the need for line marking machines that have the capacity and robustness for covering large areas. The BM 2000 CA is an agile machine that allows for paint tank capacities of 440 L or 2 material tanks of 220 L with one airless pump.
The BM 2000 CA can be equipped with up to 5 paint guns and 5 beads guns with which you can apply line widths of up to 125 cm. Borum machines are also equipped with a sliding retainer frame that makes handling the application equipment easier and quicker.
Equipped with the new generation of Borum’s LineMaster computer, you are able to easily switch between line types, and adjust line characteristics on the go in order to save time.
Line types that can be applied with this equipment
Non-pressurized black steel tank for water based cold paint.
The material tank has a filling system with large filling holes. This makes the filling process very easy to manage. In addition, the large filling holes also make cleaning the tanks easy.
Agitator (mixer) driven by hydraulic motor and with manually operated reversing valve.
The gear pump SP 2000 is especially used for jobs with big lifting height, or long material pipe.
The gear pump is operated by a hydraulic motor. Pump and material pipes are heated by heat transmission oil, which is
circulated by a hydraulically driven pump.
Max capacity is 120 L/min when fed with 30 L/min. hydraulic oil flow.
For the SP 2000 a motor driven PTO can be used for driving a hydraulic pump. An electrically operated control valve govern the gear pump speed.
With this arrangement remote operation of the pump system can easily be performed.
Sliding retainer frame, upon which 1-3 paint guns and 1-3 bead guns can be attached as standard. You can also opt for the option wide retainer on which up to 5 paint guns and 5 bead guns can be provided.
Easily slideable retainer from side to side for an optimal working position. Ground distance is maintained by retainer wheel to ensure a constant road marking width.
Lifting of retainer is done from operators seat.
Paint filter with cut-off valve for easy maintenance.
Can be equipped with multiple material tanks, so that multi-color marking can be carried out.
Working speed can be up to 15 km/h depending on the conditions, e.g. material, line type and operator experience.
Automatic high-performance spray gun. Nozzle set for water based, solvent based and high solid paints. Possibility to apply road marking in widths up to 125 cm (50") depending on the number of spray guns depending on nozzle size, line thickness, work conditions, and application speed.
High pressure filter unit with integrated pulsation damper. Easy cleaning and maintenance.
High-pressure airless spraying uses a high-pressure airless piston pump to spray the paint. The airless spray paint is sharper and smoother than atomized spray as there is no high-speed air flow to scatter any rebounding paint.
The marked lines are neat and more clear-cut compared to atomizing spray paint. This method can apply paints of high viscosity, and apply relatively thick layers in a single pass. However, the paint cannot be mixed in with glass beads as in the case of atomizing spray equipment due to the pump.
10L pressure solvent tank for cleaning of hoses and paint guns.
The Borum LineMaster control unit is an easy way of setting and controlling your line marking jobs. The LineMaster is attached to the operator's section of the machine and gives you full control of all your line marking tasks, from line application and pre-marking to reporting and invoicing.
It is possible to store up to 99 different line types, and to arrange these in up to 30 different marking programs. You are also able to pre-set line widths, line types, colours and combinations to have them ready for marking, and can instantly adjust them on the go.
Furthermore, you are able to view the status of various mechanical parts of the machine (e.g. compressor) on the computer screen that will help with correctly maintaining the machine and avoiding break downs.