COLD PAINT APPLICATION
Airport marking creates the need for line marking machines that have the capacity and robustness for covering large areas. The BM 2000 C is an agile machine with excellent load that allows for paint tank capacities of 440 L or 2 x 220 L for two colors.
Equipped with the new generation of Borum’s LineMaster computer, you are able to easily switch between line types, and adjust line characteristics on the go in order to save time. Borum machines are also equipped with a sliding retainer frame that makes handling the application equipment easier and quicker.
The BM 2000 C can be equipped with 1-2 paint guns and 1-2 bead guns and can apply line width of up to 50 cm.
Line types that can be applied with this equipment
Pressurised material tank and filters in stainless steel for water and ammonium based paints.
Dual stroke high pressure airless pump.
Capacity: Up to 24 litres/min (53 lb wt./min)
Max pressure: 270 bar (3915 psi).
Reduced valve strokes for optimal handling of paint pressurised material tank and filters in stainless steel for water and ammonium based paints.
Sliding retainer frame, upon which 1-2 paint guns and 1-2 bead guns are attached. Easily slidable from side to side for an optimal working position.
Ground distance is maintained by retainer wheel to ensure a constant road marking width.
Lifting of retainer is done from operator's seat. Pneumatic cylinder, foundation and pneumatic solenoid valve.
Paint filter with cut-off valve for easy maintenance.
Can be equipped with multiple material tanks, so that multi-color marking can be carried out simultaneously.
Working speed can be up to 15 km/h depending on the conditions, e.g. material, line type and operator experience.
High-performance spray gun. 6 mm nozzle set for water based, solvent based and high solid paints. The BM C 6 gun can work with paint marking pressure up to approx. 8 bar.
An air capacity of 300-700 L/min. is needed per gun.
Possibility to apply lines in widths from 8 to 20 cm with one gun depending on work conditions, application speed, and layer thickness. Line thickness is typically between 0.25 mm to 0.80 mm
Cold paint material is a cost effective solution for executing flat markings over all types of pavements and for use in repairments. The Borum cold paint application equipment can accommodate any type of line marking job as it can be set to execute lines in widths of 8-100 cm. Furthermore, depending on the choice of material tanks, it is possible to apply lines in different colours in the same time.
10L pressure solvent tank for cleaning of hoses and paint guns.
The Borum LineMaster allows you efficient control of all line marking tasks, from line application and pre-marking to reporting and invoicing. It is possible to store up to 99 different line types, and to arrange these in up to 30 different marking programs. You are also able to pre-set line widths, line types, colours and combinations to have them ready for marking, and can instantly adjust them on the go.