Borum Mini-truck offers the perfect truck-based solution, and is ideal in connection with major road marking work on highway or motorway where capacity and high speed is a priority.

The modular designed BM TR 1000 C is the smallest Borum truck solution for spray plastic application.

Line Types

Line types that can be applied with this equipment

Contact us about this product Download datasheet [uk]

ENGINE

  • Type : Diesel, type 7C15
  • RatedPower : 145 HP @ 3500 rpm. The gearbox has 6 speeds forward.
  • Cylinder : 4 cylinders 3.0 liter with intercooler

COMPRESSOR

  • Compressor Capacity : Motor driven screw compressor. 3,5 m3/min at 10 bar. The diesel motor also drives the pumps for the hydraulic system. The unit has a diesel tank with 60 L capacity.

DRIVING PROPERTIES

  • Chassis : Fuso truck, chassis type Canter. 7,5T GVW
  • Operator section : The operator section is mounted on rails for easy shift from one side to the other. 2 head sets for communication between driver and operator.
  • Steel frame : The equipment is mounted on a steel frame of 4.6m x 2.2m. The frame has a solid rear frame on which indicator panel and warning light can be mounted. Rails with chains at ladders. Working platforms made in skid resistant material.
  • Telescopic Pointer : Telescopic pointer, hydraulically operated. Lifting and lowering of the pointer is controlled from the operator seat. The pointer is placed in the center of the truck and can manually be positioned in the right or left side.

COLOUR

  • Colour : RAL 1007 (Other colours available on request)
  • Colour : Standard: RAL 1007. Other colours available on request.

DIMENSIONS

  • Length : 6420 cm excluding pointer
  • Width : 2200 mm in transport position
  • : BM TR C 1000 fits into a standard shipping container
  • Weight : 7500 kg
  • Width : 2270 mm excl. rotating light

THERMOPLASTIC PRESSURISED TANK

Pressurised tank indirectly heated via thermal oil. The thermal oil and thermoplastic material temperature is thermostatically controlled and regulated automatically.

Vertical agitator (mixer)
With hydraulic transmission. Heated center pipe for efficient uniform temperature control. Perfect melting & homogenization of the thermoplastic. Stable construction with foundation and bearings at the top of the material tank.

Burner system
Diesel burner system for heating of the thermal oil (and thermoplastic). Propane burner available on demand.

THERMO SPRAY APPLICATION

Sliding retainer frame, upon which 1-3 spray guns and 1-3 bead guns can be attached. Easy slidable from side to side for an optimal working position. Ground distance is maintained by retainer wheels hereby ensuring a constant road marking width.

Lifting of retainer from operators seat is done using a hydraulic cylinder.

All material pipes are oil-jacketed and insulated to maintain an ideal material temperature.

Effective heating of the complete unit using a centrifugal pump, 42 L/min, hydraulically driven.

Line thickness is typically between 0.75 mm to 1.5 mm

Marking speed up to 15 km/h depending on the work conditions, operator, etc.

BM SP 2500 SPRAY-PLASTIC GUN

Automatic high-capacity spray plastic gun. Consists of an oil jacketed gun body and a pneumatic cylinder. Possibility to apply line widths ranging from 10 - 20 cm depending on line thickness, work conditions, application speed and layer thickness. As an alternative, we offer a narrow nozzle, which can spray 5-15 cm with one gun.

Optional narrow nozzle size of 3 mm or wide nozzle size of 7 mm.

Thermoplastic Spray Advantages

Due to the equipment working via a pressure vessel, it is very simple and easy to use as the pressure in the vessel is the same as the pressure in the application. Furthermore, the tank requires very little maintenance.

Thermoplastic spray markings are a cost-efficient solution as the applied lines do not require as much material as extruded profiled markings. Furthermore, this type of material forms a uniform application that is more durable and dries faster compared to cold paint applications.

LineMaster features

The Borum LineMaster allows you efficient control of all line marking tasks, from line application and pre-marking to reporting and invoicing. It is possible to store up to 99 different line types, and to arrange these in up to 30 different marking programs. You are also able to pre-set line widths, line types, colours and combinations to have them ready for marking, and can instantly adjust them on the go.

CRUISE CONTROL

For your convienience we recommend use of cruise control. Read more about the cruise control in the Borum Knowledge Lab on www.borum.as.

QUICK CLEANING

Pneumatically controlled quick cleaning system for removal of solids left in the extrusion slot. Can be activated while extrusion is in process and is only slightly detectable on the line in the form of a moderate thickening of layer.

Pre-marking system with paint can

Cruise control

Bar with pneumatic lift for mounting warning lights

(Comes without lights)

Sunshade with 1 rotating light

Remote control for BM LineMaster

Cone holder

GPS system

Pointer turning with steering

With hydraulic lifting system

Bead alarm mounted on bead gun

Air drier for bead tank

Pre-marking system with paint gun

Airknife

Ejector filling of bead tank

Fixed pointer

With hydraulic lifting system

Hydraulic broom

BORuM ON SOCIAL MEDIA

Follow us on these social platforms