COLD PAINT AIRLESS APPLICATION EQUIPMENT
The Borum® Master 3000 series provides you with a variety of high capacity line marking machines designed for medium to large scale jobs such as marking highways, motorways or airport runways.
The material tank capacity can be of 440 L or alternatively, 2 x 440 L. The possibility for the large material capacity naturally gives fewer stops during the day for refilling.
The BM 3000 has a two-seat slidable drive and operator section for flexible working on left or right side.
The application equipment can be set to execute lines in widths of 8-100 cm and with multiple colors. The equipment may be used for the application of single and double lines of different widths, as well as for simultaneous application of continuous and interrupted lines.
Line types that can be applied with this equipment
Pressurised material tank and filters in stainless steel for water and ammonium based paints.
Dual stroke high pressure airless pump.
Capacity: Up to 24 litres/min (6,5 gal/min)
Max pressure: 270 bar (3915 psi).
Reduced valve strokes for optimal handling of paint pressurised material tank and filters in stainless steel for water and ammonium based paints.
The gear pump SP 2000 is especially used for jobs with big lifting height, or long material pipe.
The gear pump is operated by a hydraulic motor. Pump and material pipes are heated by heat transmission oil, which is
circulated by a hydraulically driven pump.
Max capacity is 120 L/min when fed with 30 L/min. hydraulic oil flow.
For the SP 2000 a motor driven PTO can be used for driving a hydraulic pump. An electrically operated control valve govern the gear pump speed.
With this arrangement remote operation of the pump system can easily be performed.
Sliding retainer frame, upon which 1-3 paint guns and 1-3 bead guns can be attached as standard. You can also opt for the option wide retainer on which up to 5 paint guns and 5 bead guns can be provided.
Easily slideable retainer from side to side for an optimal working position. Ground distance is maintained by retainer wheel to ensure a constant road marking width.
Lifting of retainer is done from operators seat.
Paint filter with cut-off valve for easy maintenance.
Can be equipped with multiple material tanks, so that multi-color marking can be carried out.
Working speed can be up to 15 km/h depending on the conditions, e.g. material, line type and operator experience.
Automatic high-performance spray gun. Nozzle set for water based, solvent based and high solid paints. Possibility to apply road marking in widths up to 125 cm (40 in) depending on the number of spray guns depending on nozzle size, line thickness, work conditions, and application speed.
High pressure filter unit with integrated pulsation damper. Easy cleaning and maintenance.
High-pressure airless spraying uses a high-pressure airless piston pump to spray the paint. The airless spray paint is sharper and smoother than atomized spray as there is no high-speed air flow to scatter any rebounding paint.
The marked lines are neat and more clear-cut compared to atomizing spray paint. This method can apply paints of high viscosity, and apply relatively thick layers in a single pass. However, the paint cannot be mixed in with glass beads as in the case of atomizing spray equipment due to the pump.
10L pressure solvent tank for cleaning of hoses and paint guns.
The Borum LineMaster allows you efficient control of all line marking tasks, from line application and pre-marking to reporting and invoicing. It is possible to store up to 99 different line types, and to arrange these in up to 30 different marking programs. You are also able to pre-set line widths, line types, colours and combinations to have them ready for marking, and can instantly adjust them on the go.