2 COMPONENT SPRAY AND EXTRUSION (98:2)
From city areas to urban and interurban roads, the Borum® Master 2000 can handle both smaller jobs and longer road stretches.
The BM 2000 CP S T is an agile machine with excellent load abilities and a turning radius of only 3.2 m. It allows for paint tank capacities of 440 L or 2 x 220 L for two colors.
The BM 2000 has a one-seat slidable drive and operator section for flexible working on the left or right side.
The 2-component application equipment can be set to execute lines in widths between 10-30 cm. The equipment may be used for the application of various types of plain and profiled lines, single and double lines of different widths.
Line types that can be applied with this equipment
Agitator driven by hydraulic motor and with
manually operated reversing valve.
The Borum Vario Retainer provides a unique possibility to interchange between applications in a very short time, with very few standard tools.
The retainer makes it possible to use all application equipments in different positions on the machine.
Easily slideable from side to side for an optimal working position. Ground distance is maintained by retainer wheel to ensure a constant road marking width.
The retainer makes it possible to use all application equipment in different positions on the machine. When the work is done, the retainer and application equipment can be easily stowed under the machine.
The retainer makes interchange between applicators fast and easy as only a few standard tools are needed. The result is a flexible, ease to operate and simple to maintain platform.
Agitator driven by hydraulic motor and with manually operated reversing valve.
Filter with cut-off valve for easy maintenance. For paint guns only.
Consisting of a lobe type paint pump and gear type pump for hardener. The two pumps are driven by one hydraulic motor via chain and variable gearbox securing the 98:2 relation between paint and hardener. The pump unit has a flow sensor for controlling that hardener flows when working. The pump has a sensor for registration of the paint flow. With valves for paint hardener and cleaning solvent. There is a controller for performing the flushing of gun(s) and mixer.
The extruder is ordered for the specific line width. The line width can be 10-30 cm and the line thickness can be from 1.5 to 10 mm.
Provided with a quick connector to the mixer head for easy exchange of head. The shutter is provided with pneumatic cylinder with cleaning arrangement. With flex-shutter in each side, 2 x 0,5 cm for making alternative lines of +- 0,5 cm in order to work with the agglomerate unit.
By adding flex-shutters to each side, the extruder can be used in combination with the Borum Agglomerate system and still make the right line width.
Fitting and exchanging the Borum 2-Component Extruder can be done in less than 2 minutes, without using tools at all. The new flex shutters on each side can either be fixed or activated, meaning that road marking with both flat lines and Agglomerate can be done with the same extruder. Cleaning the equipment is of course done by a one button sequence controlled by the Borum LineMaster.
The system is activated via the Borum LineMaster computer.re solvent tank for cleaning of mixer-head, hoses and paint guns. The cleaning process is an automated preset sequence ensuring the correct valves are opening/closing.
36L (9 gal) pressure solvent tank for cleaning of mixer-head, hoses and paint guns.
Stainless steel, max 8.5 bar (123 psi).
The Borum LineMaster allows you efficient control of all line marking tasks, from line application and pre-marking to reporting and invoicing. It is possible to store up to 99 different line types, and to arrange these in up to 30 different marking programs. You are also able to pre-set line widths, line types, colours and combinations to have them ready for marking, and can instantly adjust them on the go.